Green Chemistry綠色化工準則.

Green Chemistry(Sustainable Chemistry.)今年即將慶祝10週年!　這個新觀念,　在2005年歸納出12條準則,　如下:

(1). Prevent waste: Design chemical syntheses to prevent waste, leaving no waste to treat or clean up.
(2). Design safer chemicals and products: Design chemical products to be fully effective, yet have little or no toxicity.
(3). Design less hazardous chemical syntheses: Design syntheses to use and generate substances with little or no toxicity to humans and the environment.
(4). Use renewable feedstock: Use raw materials and feedstock that are renewable rather than depleting. Renewable feedstock are often made from agricultural products or are the wastes of other processes; depleting feedstock are made from fossil fuels (petroleum, natural gas, or coal) or are mined.
(5). Use catalysts, not stoichiometric reagents: Minimize waste by using catalytic reactions. Catalysts are used in small amounts and can carry out a single reaction many times. They are preferable to stoichiometric reagents, which are used in excess and work only once.
(6). Avoid chemical derivatives: Avoid using blocking or protecting groups or any temporary modifications if possible. Derivatives use additional reagents and generate waste.
(7). Maximize atom economy: Design syntheses so that the final product contains the maximum proportion of the starting materials. There should be few, if any, wasted atoms.
(8).Use safer solvents and reaction conditions: Avoid using solvents, separation agents, or other auxiliary chemicals. If these chemicals are necessary, use innocuous chemicals. If a solvent is necessary, water is a good medium as well as certain eco-friendly solvents that do not contribute to smog formation or destroy the ozone.
(9). Increase energy efficiency: Run chemical reactions at ambient temperature and pressure whenever possible.
(10). Design chemicals and products to degrade after use: Design chemical products to break down to innocuous substances after use so that they do not accumulate in the environment.
(11). Analyze in real time to prevent pollution: Include in-process real-time monitoring and control during syntheses to minimize or eliminate the formation of byproducts.
(12). Minimize the potential for accidents: Design chemicals and their forms (solid, liquid, or gas) to minimize the potential for chemical accidents including explosions, fires, and releases to the environment.